Please select To the mobile version | Continue to access the desktop computer version
Cyber Bitcoin
Edited by qqqpeter at 2019-9-9 13:59

Recently, Innosilicon has released several models of T2T series bitcoin mining products on the market: for example, T2T+, T2TZ, T2TZS, T2TH, T2THS, T2THU, according to the factory batch, SI, SII, today is the latest model Innosilicon T2THU-30T bitcoin mining machine products.

The Innosilicon T2THU-30T is different from the twin-tube design of the brother model T2T-32T, and has been changed to a double-barrel erect design with a power-integrated design.

ia_100000031.jpg
INNOSILICON T2T-32T

ia_100000032.jpg
INNOSILICON T2THU-30T

The power combination method has changed from a back-back backpack (power supply) to a cross-body shoulder bag (power supply). At present, many mining machine manufacturers have changed the design to this format. It seems that the shoulder bag (side power supply) ) is the popular element of ASIC mining machines.

ia_100000033.jpg
INNOSILICON T2THU-30T vertical placement

ia_100000034.jpg

The T2THU-30T heat dissipation method has also become a single-side double-fan cooling air supply, shortening the air duct is conducive to rapid heat discharge.

ia_100000035.jpg
INNOSILICON T2THU-30T horizontal placement

ia_100000036.jpg

The nameplate of the product name and model, the IP address acquisition method, the login name and password, and the precautions for use are attached to the side of the mining machine.

ia_100000037.jpg

ia_100000038.jpg

ia_100000039.jpg

The control board is still a familiar model, SD card slot, IP address reporting button, Ethernet interface, reset button, status indicator.

ia_100000040.jpg

ia_100000041.jpg

The IPset (IP address reporting) setting button usage method and function are as follows. Reasonable use can be easily performed for maintenance operations:

1. Press the IPset button for 1-4 seconds.
(1) Send the IP of the machine to the "SetIP" tool;
(2) With the "SetIP" tool, set the miner to a static IP within the specified range of the tool.

2. Press and hold the IPset button for 4-15 seconds, the static IP will change to dynamic IP, and the pool settings will be restored to the default settings.

3. Press and hold the IPset button for more than 15 seconds to switch the machine IP to static IP and restore the IP to the default IP192.168.1.254.

Reset method and function: Press reset to restart the machine. Press and hold for 5-10 seconds to return to factory settings.

A 6pin interface from the power supply to the control board provides power to the control board and fan. The control board and the mining board are connected by a flat cable.

ia_100000043.jpg

There is also a voltage regulating line connected between the power supply and the control board. The user can select the mining machine according to the conditions, such as low energy consumption, balance, factory (default) and power hash rate.

ia_100000044.jpg

The integrated design power supply has no marking and no power value shown. The entire power supply is L-shaped and the position of the terminal is in the L-shaped gap.

ia_100000046.jpg

ia_100000047.jpg

The power supply uses a 10A plug. The traditional mining farm can be used without a modified socket, and the power supply also has a switch that is convenient to use.

ia_100000048.jpg

A metal piece connection is used between the power supply and the mining board, and the risk of the short circuit should be paid attention to when the metal piece is exposed to the outside.

ia_100000049.jpg

The more praised part is the T2THU-30T bottom anti-slip mat. The careful user may find that there is no anti-slip mat on the bottom of the miner. The feeling of the process is still different.

ia_100000050.jpg

After nearly 40 minutes of the testing, the hash rate curve shows the hash rate as 30.59T.

ia_100000051.jpg

After running normally, the noise level is 81 decibels, the power consumption of the whole machine is 2469W, and the receiving hash rate at the mining pool is 30.4T for 24 hours. The calculated power consumption ratio of T2THU-30T is 81.2W/T.

ia_100000052.png

ia_100000053.jpg

The T2THU-30T uses a 10A wire. The measured wire temperature is up to 41.5 degrees, and the temperature at which the plug and socket are in contact is slightly higher.

ia_100000054.jpg
Reply

Use magic Report

All comments
    You have to log in before you can reply Login | register

    Points Rules

    Contact
    • 313688250
    • service@cybtc.org
    qqtwitter
    qqtelegram
    qqdiscord
    Copyright© 2019 cybtc.info
    -->
    Quick Reply To Top Return to the list