Please select To the mobile version | Continue to access the desktop computer version
Cyber Bitcoin
Edited by qqqpeter at 2019-3-19 09:44

With the hashate increased,LKETC developed 1.5T Bitcoin miner which based on A1 chip and sold at the end of August.This time,we recieve a Tang-class Bitcoin miner for the test(1500G&1060w on wall).   

1. Package:

The miner with plastic film.

141643mdu7fhb1f14st1bs.jpg

Package includes: 1500G Miner*1 PWM Cable *1 UTP Cable

141647fi5cvzt774zyuc0u.jpg

In the front of the miner,there are three 12cm violent fans.

141652pyj3wkjjrjkrjw02.jpg

Top of the case.

141655vih7r317fc3133wd.jpg

Side of the case.

141700fznznlczlr1ghkzk.jpg

141703hx8kqvk3wxzq3emj.jpg

From the back,you can see PSU and 6 blades.

141707kirc28i4df4321im.jpg

Sepcification:

Hash rate :  6 modules work on 1.5 T/S
Power: AC input Golden 1000 W/H
Size: 472*182*385 mm
Package Size:574*285*487mm
Gross weight: 21Kg
Fan size: 12CM*3
Chip quantity: 60 PCS  28nm ASIC
Overclocking parameter:1000Mhz +

141709e1xc533z0z0z65zm.jpg

Mining machine'scable interface.

141713tcooduwm0mziaaid.jpg

Power interface and switch.

141716d1vj0z0mmfc0fscq.jpg

Compare with xia class 1000G Bitcoin miner.

141718p5xhz4sfy4s5ests.jpg

141727lvz4xv4zc1qgf8q4.jpg

You can see parts of power from here.

141737qooa72f5cbapl4bo.jpg

6 Baldes with 60 28nm-ASIC chips.

141743ccgs3077jbcb71b1.jpg

Custom 1100w PSU

141746wt8nnt8unlu8tupu.jpg

Raspberry Pi&Control board

141749oszplptzn4kk943s.jpg

2. Installation:

Installation is easy,you just need to connect miner to your router,then turn on the power.When the machine is working properly, red and green lights lit on top.

141752onnbmu1dn91xzen3.jpg

141757dph944t2u4cdwh9c.jpg

141759n8p9v455a8ad58v5.jpg

3. Software setting:

Each case has a label.Marked with miner's ip address.For example,this one marked with 23,means the ip address is 192.168.1.23.Usually you can enter the control page with thsi IP.

141801zvzzcgziuxqimcqj.jpg

Mining status

141823fs4xwnnnxq3fzihf.jpg

141840h3td7r7r77kd7ej7.jpg

141858pk7z0ze72kn08e7z.jpg

After 6 hours working in the f2pool.The hashate is between 1400G-1506G.

141907ar8zgtmdqgqwg1qq.jpg

IN the G pool,the hashate is about 1.4T.

141947yowlx2xwfx5ll4xl.jpg

4.Power consumption, noise and temperature test


When the miner is working,the power is 1175w.

141945chibr6rgrrhoouzt.jpg

Noise: 70dBa(10 cm in front)

141910f5nkm5w2d87jld7h.jpg

Noise: 71dBa(top)

141913i46423ezxtzh4th1.jpg

Noise: 75dBa(back)

141914hy1yy58yy55x1y5g.jpg

Noise:69dBa(1m)

141924ashsrzsq1xm9x1hm.jpg

Temperature:39 degrees(fans),41degrees(on the side),46 degrees(radiator).

141928bgzac4k3ne0k5g13.jpg

141935jloltw7zcnnyvno6.jpg

141940rnrc8gl7ngm853li.jpg

5. Summary

1.Miner's packaging is not very good ,only suitable for transportation and logistics.
2.Case's detail processing is not good.
3.Bad wiring.
4.Good heat dissipation.
5.Custom PSU has good performance.
6.Hashrate performance well.
7.Power ratio has improved.
8.Suitable for large-scale deployment.

Reply

Use magic Report

All comments
    You have to log in before you can reply Login | register

    Points Rules

    Contact
    • 313688250
    • service@cybtc.org
    qqtwitter
    qqtelegram
    qqdiscord
    Copyright© 2019 cybtc.info
    -->
    Quick Reply To Top Return to the list